How we organised Splice Low-Res

It's not about the tech; that's the easy part. You need to know what you want to get out of your online event.

Sure, the tech is nice. But you still need to know what matters to your business.
Sure, the tech is nice. But you still need to know what matters to your business.

If you’re reading this, you’re probably trying to figure out how to do your first online event. We decided to do Splice Low-Res because 1) we needed to learn how to do this as covid-19 leads us deeper online and 2) we wanted to see how the media startup community was holding up.

So here are some tips. We haven’t figured it all out. But this is what we’ve learned so far. Let us know where you think we could have done better.

Know what you need

Start with your use cases. It’s not about the tech — that comes once you’ve decided what’s important for your event (that’s why you’ll only find the stuff about tech at the bottom of this post).

There isn’t a single platform that did what we needed end-to-end — not the way we wanted, at least. So break it down so you’re thinking clearly about what you need, what you want, and what you can do without.

We’re community-focused, so capturing email registrations and making this content available widely are essential for us.

Registrations are a success metric for us. It’s not the sheer number — we wanted to know that we were indeed reaching specific people in the community. If we’re not reaching the kind of people we’re trying to serve, what’s the point? The idea is to be relevant. We also want to be able to do these events regularly, so keeping people in the loop through email is key.


Jobs to be done


  1. Front-end site: For brand building, single destination, proof of concept for sponsors. Needs to be templatized for future events.
  2. Registrations: To allow us to register people, collect email addresses for future events, delegate snapshot for sponsors.
  3. Q&A: For interactive questions from delegates during the event. Ideally, these questions and comments need to appear on the video feed so it’s captured in the archive.
  4. Community engagement (post event): Following up with the delegates, eg. sending out presentation decks, connecting people 1-1, signalling the next event.
  5. Multi-source inputs (headshot, 2-way headshots, slides, videos): To allow us to cut between speakers, their presentation slides, show a website, or to run a video.
  6. Video archival: To have the event stored on YouTube or other video hosting platforms.

Nice to have

  1. Simulcast video distribution: To publish across multiple platforms at a go, eg. YouTube Live, Facebook Live.
  2. Metrics: When did people come in? How long did they stay for? Who was the most popular speaker?

Not essential

  1. Program management: To quickly put together a rundown, allowing you to move things around as needed. Only matters if you have a complex show to execute. 
  2. Speaker management: To help people discover who’s speaking. This could just go on the website, or pushed on social. 
  3. Payments: A seamless way to buy a ticket as part of the registration process. We didn’t charge for this event, so it wasn’t essential for us.

Splice Low-Res

Check out video clips of all our speakers on YouTube.



Hopin: We tried this — spent $100 on it — and realized it was too cumbersome and too inflexible for what we needed. That said, this ticks many of the boxes, from registrations and speaker management to chat conversations and output. There were just too many levels of complexity. We were also disappointed with the slow response by tech support (granted, these are busy days for them).

Zoom: A favorite for many. We didn’t like the UI. But the deal-breaker was that people needed to download the app just to join the call.

Google Hangouts/Meet: We went with this in the end for two good reasons: Everyone has joined a Hangouts before — this is familiar ground. And it just takes one click to get you in. It doesn’t tick all the boxes, but this was the most frictionless option we found. We had to manually let everybody in, but it wasn’t a massive problem. The bandwidth, given how many people were online at the same time, was amazing. Meet also allows you to record straight into your Google Drive, which is helpful when you need to share the video quickly. (Disclosure: Google News Initiative sponsored Splice Low-Res. But they never once asked us to use their services.)

OBS Studio: We stole this idea from the gaming community, which has been using OBS for years to dress up their live streams. OBS, which is open source, allowed us to add graphics, scenes, and branding — and output it all as a live stream. OBS also works across Windows and Mac. We actually created all our scenes in OBS, but decided against using it in the end because it would be hard to manage from multiple locations across 6 hours. Instead, we used Google Slides to create branded welcome slides, program rundowns for Asia and Europe, as well as house rules. But we’ll probably revisit OBS the next time we do Low-Res.

YouTube Live: From OBS, we wanted to get it out to YouTube in real time; it would have been the most obvious way to archive our show. But then we decided against that — the goal should be to drive all real-time participation through Meet, and upload the video to YT after the event.

MailChimp: We manage almost the entire Splice business on MailChimp — our newsletters run on this, as well as landing pages, some social automation, and now surveys. It made sense to collect all email registrations here, so we could quickly send updates to folks.

Carrd: We used this for our website. It’s one of the most beautiful one-page website builders out there. If you only need a single page, this is perfect.


Sound: This is quite simple. Sound is more important than video when it comes to keeping an audience engaged on a online event. Even if the video is iffy, it’s essential that people are able to listen to it. So always insist that people plug in headphones and mics (even those iPhone earbuds make a huge difference). But even the best mic isn’t helpful in an echo-y room, or a noisy street. So make sure your speakers are in quiet rooms — and that the rest are on Mute.

Video: Most standard webcams will do the trick. Google Meet will only take you up to 720p in resolution, so you don’t actually need crazy stuff like 1080p or 4K. If you want to do a little better, just add lighting. Face a bright window, or get a simple lighting kit.


Collaborate: Don’t do this on your own. It was challenging enough for just Rishad and me. So we worked with Jakub at Outriders to bring it all together. He organized the European segment, while we handled the Asia program. If there’s one lesson from covid, it’s the importance of collaboration.

Slides: Some people had some problems sharing their presentations on Meet. So as a backup, make sure you get them to share their decks with you separately. You can present it for them if you need to. Google Slides are always easier than PowerPoint attachments.

Timekeeping: Some speakers will run late. Some will have problems connecting. So make sure you have people you can count on to do a bit of quick banter to keep the conversation going.

Networking: Plenty of people will want to stay in touch with each other. Just get them to leave their email addresses in the chat window if they’re up for that.

Over-communicate: Many people will have the same questions, eg. is this recorded, how will we stay in touch, how can I get that deck. You’ll have to repeat the ground rules often, especially for newcomers.

Welcoming: Call out new people as they join. Make them feel at home.

Feedback we received

From our survey form after the event (21 responses):

“The moderators were great <3, actively responding to questions and building connection with the audience. The atmosphere was open and nice.”

“Range of speakers with a whole load of experience. More of this!”

“I particularly liked the fact that journalists from Asia and Europe could cross-pollinate ideas. That might not have been a primary aim but it was certainly a corollary outcome.”

“The content (relevant case studies), the interactivity, the good spirit, the double moderation by Rishad/Alan.”

  • 43% say they stuck around for 3-6 hours
  • A majority said they would recommend Low-Res to other media professionals
  • 95.2% said they would attend another Low-Res in the coming weeks
  • Recommendations for improvement included:
    • More short breaks in between
    • Bring in speakers from other continents, especially from Africa
    • 6 hours is too long
    • Set aside time for more questions


Co-Founder, Splice Media. Supporting media startups in Asia. Follow Alan Soon on Twitter.

more about us

Our mission is to drive radical change by supporting bold, forward-looking media startups in Asia. In order to do this, we report on, teach, transform, and fund newsrooms in Asia.

Our newsletters are read by some of the smartest people in global media.

We’re Alan Soon and Rishad Patel, and there’s more about us here.

All the knowledge from Splice Beta is right here. Learn from this community’s best.

The Splice Beta Fund is a prototyping grant that helps news and media entrepreneurs in Asia to quickly ideate, launch, test, and iterate products and services for audiences and customers. See our six grantees here!

Splice Lights On is our way of supporting the media community financially affected by Covid-19. See the grantees here.

Splice Low-Res is our virtual community check-in for media startups. Register, watch, sponsor, or stay in the loop here.

Splice is available for speaking engagements, to run workshops, product sponsorships, research, design audits, and consulting. Email us.

We also have a Telegram group. Come say hi.

Subscribe to the Splice YouTube channel.

Thanks for subscribing!